Wireless Bra with Mesh: Care Guide

Quick answer

Hand wash your wireless bra with mesh details in cold water using a gentle detergent, then lay it flat to dry. Avoid wringing, heat, and fabric softeners to preserve the 360° stretch material and mesh.

Step-by-step care routine

1. Step 1: Prepare the wash: Fill a basin with cold water and add a small amount of mild, lingerie-safe detergent. Do not use bleach or fabric softener, as they can break down elastane and leave residue on the mesh. Hot water can shrink the stretch fabric, so always stick to cold.
2. Step 2: Submerge and gently clean: Place the bra in the water and gently squeeze the soapy water through the cups and mesh panels. Avoid scrubbing or twisting the fabric. Focus on areas that contact skin, like the underband and inner cups. Rubbing the mesh against itself can cause pilling or snags.
3. Step 3: Rinse thoroughly: Drain the soapy water and refill the basin with fresh cold water. Swish the bra gently until all detergent is gone. Repeat if necessary. Residual detergent can irritate skin and attract dirt. Leftover soap dulls the fabric's softness over time.
4. Step 4: Remove excess water: Lift the bra out of the water and press it between two clean, dry towels. Do not wring or twist, as this can distort the preformed cups and damage the mesh. Rolling the bra in a towel absorbs moisture without stretching.
5. Step 5: Dry flat: Lay the bra on a drying rack or a clean towel in its natural shape. Reshape the cups gently. Keep it away from direct sunlight, radiators, and tumble dryers. Heat breaks down the 360° stretch material and can make the mesh brittle. Hanging the bra by the straps will stretch them out over time.

Product spotlight

• Softer Wohlfühl-BH mit Mesh-Details Set - Schwarz: This wireless bra uses 360° stretch material and has a seamless back with no stitching. The stretch fabric is key to comfort but needs gentle washing to avoid losing elasticity; the seamless back also means less risk of fraying if handled carefully.